The ADC ADView 2 captures blood pressure using a non-invasive method automatically with just the push of a button. This device uses the oscillometric method of measurement and can display both pulse rate and mean arterial blood pressure in about 30 seconds. A manual mode is available which allows blood pressure to be captured with a stethoscope using the traditional auscultatory method without changing cuffs. This mode allows versatility for patients with complex needs. The ADView 2 also features a customizable averaging protocol. It can be set to average between 2 to 5 blood pressure readings to ensure accuracy. The ChipOX Nellcor-compatible SPO2 module adds pulse oximetry to the ADView device. Measure oxygen saturation of arterial blood flow in just 10 seconds. This module also displays pulse rate signal strength and comes with a reusable finger clip sensor and 8 foot cable.
Add Line Note.jpg)
